Todos los dispositivos están conectados de forma inalámbrica
AP de techo QCA IPQ4019 WiFi 5 ac
5G Outdoor CPE Industrial Grade
3GPP Release 16
Applications:
For Home and Commercial Use
When indoor 5G signal is weak or not available, deploy an outdoor 5G CPE and use an IDU for indoor coverage.
For Industrial Use
Suitable for outdoor scenarios that require rapid deployment of broadband networks, such as outdoor cameras, outdoor HD video live streaming, mobile healthcare, industrial IoT, robotics, smart agriculture, and traffic command.
For Outdoor Video Monitoring
Best for outdoor 4K AI video monitoring
Key Features:
-
Worldwide 5G and LTE-A coverage
-
3GPP Release 16
-
Both SA and NSA are supported
-
Support 2.5 Gigabit Ethernet port
-
Built-in high gain wide bandwidth antennas
-
Advanced MIMO, AMC, OFDM support
-
Built-in VPN and L2/L3 GRE client support
-
IPv4 & IPv6 and Multiple PDN support
-
Support NAT, Bridge and Router operation mode
-
Standard TR-069 and SNMP Management
Hardware Specifications
Chipset Quectel RG520N Qualcomm Snapdragon X62
Memory
ROM: 4Gb Nand
RAM: 4Gb LPDDRX4
Indictors PWR, SYS, Net ,LAN, WLAN
Buttons Reset Button
Interfaces
1. 2.5GE POE Port * 1
2. SIM Slot * 1 (2FF)
3. USB 3.1 for Manufacture
LAN/WAN 2.5 GE Port * 1 (10/100/1000/2500Mbps auto-sensing, auto-MDI/MDIX)
Power Supply AC100V~240V .DC+12/1.5A~36V/0.5A POE 24V 1A Passive PoE
Power Consumption < 24W
Dimensions 280(H)×165(W)×56(T)mm
Weight 700g
Waterproof & Dustproof IP65
Operating Temperature -30℃~70℃
Storge Temperature -35℃~75℃
Operating humidity 95% Maxton-condensing
Storage humidity 95% Maxton-condensing
RF Specifications
Category 3GPP Release 16, 5G Sub-6G NR and LTE DL Cat19/ UL Cat18
Frequency Bands
Version E 5G NSA/SA：n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n48, n77, n78, n79
FDD：B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B32 TDD：B38, B39, B40, B41, B42, B43, B46, B48 WCDMA: B1, B5, B8
Version NA 5G NSA/SA：n2, n5, n7, n12, n14, n25, n26, n30, n38, n41, n48, n66, n71, n77, n78, n79
FDD：B1, B2, B4, B5, B7, B12, B13, B14, B17, B25, B26, B29, B30, B66, B71 TDD：B38, B41, B42, B43, B46, B48
WCDMA: B1, B2, B4, B5
Version LA 5G NSA/SA: n2, n4, n5, n7, n8, n28, n38, n66, n71, n78
FDD: B2, B4, B5, B7, B8, B28 TDD: B38, B42, B43, B66 WCDMA: B2, B4, B5 DL 4x4 MIMO for 5G NSA, SA, FDD and TDD
3G/4G/5G Data rates 5G NSA.Max3.4Gbps(DL)/600Mbps(UL)
5G SA.Max2.4Gbps(DL)/1Gbps(UL) LTE.Max1.6Gbps(DL)/200Mbps(UL) HSPA+.Max42Mbps(DL)/5.76Mbps(UL)
WCDMAMax384Kbps(DL)/384Kbps(UL)
5G NR Features 3GPP Release16
Supported modulations: -Uplink: π/2 BPSK, QPSK,16QAM,64QAMand256QAM-
Downlink: QPSK,16QAM,64QAMand256QAM Supported SCS:15kHz 2 and 30kHz 2 SA 3 and NSA 3 operation modes
supported on all the 5G band Option 3x,3a,3 and Option2 Maximum transmission data rates 4:-
NSA: 3.4Gbps(DL)/550Mbps(UL)- SA: 2.4Gbps(DL)/900Mbps(UL)
Output Power Class3(24dBm+1/-3dB) for WCDMA bands.
Class3(23dBm±2dB) for LTE-FDD bands.
Class3(23dBm±2dB) for LTE-TDD bands.
Class3(23dBm±2dB) for5G NR bands.
Class2(26dBm±2dB) for LTE B38/B40/B41/B42 bands.
Class2(26dBm±2dB) for 5G NR n41/n77/n78/n79 bands.
5G/4G Antenna 4 Built-in directional antennas
5G/4G Antenna Gain Peak 8dBi
Software Description
Status indicator SIM Card Status, Data transmission, Signal Strength, Language
Internet Status Internet Status, Operator, Network Mode, Cell ID, RSRP, RSRQ
WAN or Air interface Multi-APN support, maximum 4 PDN can be active at the same time;
Set the static router for each APN. IP pass through support IPv4/v6 dual stack support
LAN Info DHCP Server/Client support
DNS and DNS proxy support Multicast/Multicast Proxy support
Rate Info DL/UL Data Rate, Online Time
Device & SIM Info Product Model, IMEI, Software Version, UICCID, IMSI
Statistics CPU Usage, Memory Usage, APN List, Bandwidth Statistics Throughput Statistics
Device Information System Information Version Information LAN Status
WAN Settings Network Mode: NAT, Bridge, Router
NR/LTE Settings Connect Method, Roaming Switch, LTE/NR Network Status
Scan Mode Full Band, Band Lock, Earfcn Lock, PCI Lock
APN Management APN Settings APN List
LAN Settings LAN Host Settings DHCP Settings
Firewall
Firewall switch
MAC Address Filtering
IP Address Filtering
URL Filtering
Access Control
Parent Control
HTTPS Login from WAN or LAN
DoS attack protection
Sync Flood attack protection
Up to three different level users’ authority.
VPN IPSec, PPTP, L2TP, GRE and VPN pass-through
Device Management
Local management web page.
SSH or Telnet CLI. SNMP V1/V2 or TR069 remote management.
Software upgrade via WEB/ TR069 / FOTA
Diagnostics.
USIM PIN management and card authentication
IPv6 IPv4v6 Dual Stack supported
Other Functions DMZ, SIM lock, PIN management DDNS
Maintenance Scheduled Reboot, Reboot, Reset
NTP Auto, Manual, DST
Diagnostics Ping, Traceroute, Iperf
Syslog 8 levels for debugging
WEB Settings Manage the web access settings
Account Account management
Airlink iLife's 5G CPE can be installed with a WiFi 6 Indoor CPE by following these general steps:
-
Choose a location for the 5G CPE that provides good 5G network coverage and has a power source.
-
Connect the 5G CPE to the Internet by inserting a SIM card.
-
Connect the 5G CPE to the power source and turn it on.
-
Connect the WiFi 6 Indoor CPE to the 5G CPE either via an 2.5G Ethernet cable.
-
Configure the WiFi 6 Indoor CPE with the desired network settings, such as the network name (SSID) and password.
-
Connect devices such as computers, smartphones, and tablets to the WiFi 6 Indoor CPE to access the 5G network.
Note: The specific steps and details may vary depending on the specific models of the 5G CPE and WiFi 6 Indoor CPE that you are using.